Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Polymer-bound pre-dispersed rubber chemicals
(Total 12 Products for Rubber Curing)
Pre-dispersed Sulfur Donor Vulcanizator CLD-80
Pre-dispersed non-staining sulfur donor curing agent CLD-80 Vulcanizator 1. Composition Approx. 80 wt% Caprolactmadisulfide (CLD) CAS No.: 23847-08-7 EINECS No.: 245-910-0 Approx. 20 wt% polymer binder and dispersing agent
2. Application: Non-staining sulfur donor for the vulcanization of heat resistant sulfur-cured...
Characteristics: Curekind® HVA-2is grey-yellow powder, negligible soluble in water. Application: HVA-2 for a variety of synthetic rubber and rubber and plastic as curing agents and auxiliary curing agent, can be significantly improve the cross-linking and heat resistance. HVA-2 is regulated for use in artic
Slab-form Pre-dispersed rubber curing agent DTDM-80
Pre-dispersed rubber curing agent Dithiodimorpholine DTDM-80 Non-staining sulphur donor for the vulcanization of natural and synthetic rubber compounds. Product composition: Approx. 80 wt% 4,4'-Dithiodimorpholine (DTDM) CAS No.: 103-34-4 EINECS No.: 203-103-0 Approx. 20 wt% polymer binder and dispersing...
Pre-dispersed curing agent Dithiodimorpholine DTDM-80
Pre-dispersed curing agent Dithiodimorpholine DTDM 1.Product composition: Approx. 80 wt% 4,4'-Dithiodimorpholine (DTDM) CAS No.: 103-34-4 EINECS No.: 203-103-0 Approx. 20 wt% polymer binder and dispersing agent 2. Application: Non-staining sulphur donor for the vulcanization of natural and synthetic rubber compounds....
EPDM-Bound Pre-dispersed Rubber Curing Accelerator MBT-80
Pre-dispersed Rapid Curing Speed Accelerator MBT-80 1.Product composition: Approx. 80 wt% 2-Mercapto-benzothiazole (MBT/M)
CAS No.: 149-30-4 EINECS No.: 205-736-8
Approx. 20 wt% polymer binder and dispersing agent
2. Application: Rapid curing speed, accelerator for the vulcanization of natural and synthetic rubbers,...
Rubber Curing Activator and Acid Acceptor MgO-75
Curing activator and acid acceptor MgO-75 1.Product composition: Approx. 75 wt% Magnesium oxide (MgO)
CAS No.: 1309-48-4 EINECS No.: 215-171-9
Approx. 25 wt% polymer binder and dispersing agent 2.Application: Curing activator and acid acceptor, particularly suitable for polychloroprene rubber (CR) and adhesive....
Pre-dispersed Rubber Curing Agent Sulphur S-70GS
PROPERTIES: Sulfur is a vulcanizing agent for natural and dialkene synthetic rubber while it is difficult for traditional sulfur powders to disperse in rubber homogeneously. It is extremely important for light- colored rubber products to use Actmix®S-80 due to excellent dispersity to avoid
EPDM-Bound Metallic Oxide Vulcanization Activator ZnO-80
Metallic Oxide Vulcanization Activator Actmix ZnO-80GE F140 Prepare rubber curing activator Polymer-bound rubber chemicals masterbatch Pre-dispersed rubber additives 1.Product composition: Approx. 80 wt% Zinc oxide (ZnO)
CAS No.: 1314-13-2 EINECS No.: 215-222-5
Approx. 20 wt% polymer binder and dispersing agent
2....
Rubber Curing Activator Actmix®ZnO-85GE F140
Rubber curing activator ZnO-85 1.Product composition:
Approx. 85% Zinc oxide (ZnO)
CAS No.: 1314-13-2 EINECS No.: 215-222-5
Approx. 15% polymer binder and dispersing agent 2. Application: Curing activator for the use in natural and synthetic rubber. Almost all kinds of rubber products, improving static and dynamic...
Non-sulfur Rubber Curing Agent HVA-2-75 PDM-75
Non-sulfur curing agent HVA-2 Cas no.3006-93-7 Rubber Curing Agent PDM-75 HVA-2-75 Polymer-bound Rubber Accelerators PDM/HVA-2 1.Product composition:
Approx. 75 wt% N,N`-m-Phenylenebismaleimide (HVA-2, PDM, PBMR, HA-8)
CAS No.: 3006-93-7 EINECS No.: 221-112-8
Approx. 25 wt% polymer binder and dispersing agent...
Traditional Pre-dispersed Rubber Curing Agent for S-70
PROPERTIES: Sulfur is a vulcanizing agent for natural and dialkene synthetic rubber while it is difficult for traditional sulfur powders to disperse in rubber homogeneously. It is extremely important for light- colored rubber products to use Actmix®S-80 due to excellent dispersity to avoid
Rapid Curing Speed Rubber Accelerators MBT(M) Powder
Rapid curing speed thiazoles accelerators MBT(M) DESCRIPTION 2 - Mercaptobenzothiazole
C7H5O2NS2
M.W. 167.26
CAS No.: 149 -30 -4
EINECS No. 205-736-8 Items Specification Powder 1st Powder Dust free Powder Appearance Light yellow or grey white powder Initial Melting Point, ℃ Min. 171.0 170.0 169.0 Heat Loss, % Max....
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.