Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Polymer-bound pre-dispersed rubber chemicals
(Total 12 Products for Rubber Curing Agent Pdm 75 Hva 2 75)
Polymer bound foaming agent ADC-50
Actmix ADC-50GE Actmix ADC-75GE EPDM Foaming Agent Azodicarbonamide Pre-dispersed Rubber Blowing Agent ADC ADC Masterbatch CAS No 123-77-3 PROPERTIES: ADC is a nitrogenous organic foaming agent for various rubbers such as CR, EPDM, IIR, NBR(NBR/PVC) and SBR, especially for tiny and uniform pored products. ADC powder...
Stained Rubber Accelerator MBTS-75GE/C
Stained Rubber Accelerator MBTS-75GE/C for easily identification Product composition: Approx. 75 wt% 2,2-Dibenzothiazole disulfide (MBTS/DM)
CAS No.: 120-78-5 EINECS No.: 204-424-9
Approx. 25 wt% polymer binder and dispersing agent
Specification:
Characteristics: Curekind® HVA-2is grey-yellow powder, negligible soluble in water. Application: HVA-2 for a variety of synthetic rubber and rubber and plastic as curing agents and auxiliary curing agent, can be significantly improve the cross-linking and heat resistance. HVA-2 is regulated for use in artic
Rubber Accelerator Stained in Purple DPG
Rubber Accelerator Stained in Purple DPG Product composition:
Approx. 80 wt% 1,3-diphenylguanidine (DPG/D)
CAS No.: 102-06-7 EINECS No.: 203-002-1
Approx. 20 wt% polymer binder and dispersing agent Specification:
Pre-dispersed Rubber Scorching Retarders CTP-50
Pre-dispersed Rubber Scorching Retarders CTP-50 Prepared Rubber Scorching Retaders Premix CTP-50/SBR binder Cas No 17796-82-6 CTP Compared to traditional CTP powders, Actmix®CTP-50GS allows: Dust free products with a complete filtration up to 150µm, avoid bad odor of CTP, health guard of operators. Effective guarantee...
Pre-dispersed Polymer-bound Rubber Accelerator DCBS-80
Polymer-bound Pre-dispersed Rubber Chemicals/additives N,N-Dicyclohexyl-2-Benzothiazole Sulfenamide DCBS-80 Compared with CBS, TBBS & MBS, DCBS has long-scorching time, long curing time, low modulus of vulcanized rubber. So should be at a higher dosage to obtain the corresponding physical properties. Typically...
Pre-dispersed Rubber Anti-Scorching Agent CTP-80
Compared to traditional CTP powders, Actmix CTP-80GE F500 allows: Dust free products with a complete filtration up to 150µm, avoid bad odor of CTP, health guard of operators. Effective guarantee of activity of MBI due to pre-dispersed masterbatch. Tack free products at room temperature, convenience and accuracy on...
Delay Sorching Acceleraor DCBS-80
Delay scorching and long curing time of accelerator DCBS-80 1.Product composition: Approx. 80 wt% N,N-Dicyclohexyl-2-benzothiazolsulfene amide (DCBS, DZ) CAS No.: 4979-33-2 EINECS No.: 225-625-8 Approx. 20 wt% polymer binder and dispersing agent 2.Application: Delay scorching and long curing time of vulcanization...
Accelerator for ACM DOTG 1.Product composition: Approx. 75 wt% Di-o-tolylguanidine (DOTG)
CAS No.: 97-39-2 EINECS No.: 202-577-6
Approx. 25 wt% polymer binder and dispersing agent
2.Application: Accelerator for the vulcanization of natural and synthetic rubbers, particularly used for the diamine activated...
Polymer-bound Pre-dsipersed rubber accelerator OTOS-80
Fast vulcanization rate and long scorching time accelerator OTOS-80 1.Product composition: Approx. 80 wt% Morpholin-4-yl morpholine-4-carbodithioate (OTOS) CAS No.: 13752-51-7 EINECS No.: 237-335-9 Approx. 20 wt% polymer binder and dispersing agent 2. Application: A fast vulcanization rate and long scorching time...
Non-nitrosamine Rubber Acceleartor TBzTD-70
N-nitrosamine free sulphur donor acceleartor TBzTD-70 1. Product composition: Approx. 70 wt% Tetrabenzylthiuram disulfide (TBzTD) CAS No.: 10591-85-2 EINECS No.: 404-310-0 Approx. 30 wt% polymer binder and dispersing agent 2. Application: N-nitrosamine-free sulphur donor and accelerator; ultra accelerator of natural...
Ultra-fast or Vice Accelerator TDEC-70
Ultra-fast or vice accelerator TDEC-70 1.Product composition: Approx. 70 wt% Tellurium diethyldithiocarbamate (TDEC) CAS No.: 20941-65-5 EINECS No.: 244-121-9 Approx. 30 wt% polymer binder and dispersing agent 2.Application: Ultra-fast or vice accelerator for IIR, NR, NBR,SBR and EPDM rubbers. Application to vehicle...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.