Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Product Categories
Polymer-bound pre-dispersed rubber chemicals
(Total 12 Products for Mbi Cas No 583 39 1)
EPDM-bound Pre-dispersed Non-staining Antioxidant MBI-80
Non-staining antioxidant MBI-80 1.Product composition: Approx. 80 wt% 2-Mercaptobenzimidazole (MBI/MB)
CAS No.: 583-39-1 EINECS No.: 209-502-6
Approx. 20 wt% polymer binder and dispersing agent 2.Application: Non-staining antioxidant for vulcanizates based on natural and synthetic rubbers. Application to various...
Pre-dispersed Rubber Anti-oxidant MMBI-70
Non-staining antioxidant MMBI-70 1.Product composition: Approx. 70 wt% Methyl-2-mercaptobenzimidazole (MMBI/MMB) CAS No.: 53988-10-6 EINECS No.: 258-904-8 Approx. 30 wt% polymer binder and dispersing agent 2.Application: Non-staining antioxidant for vulcanizates based on natural and synthetic rubbers; synergistic...
High-quality Pre-dispersed Rubber Antioxidant ZMMBI ZMTI
High-quality Pre-dispersed Rubber Antioxidant ZMMBI-70 ZMTI-70GE ZMMBI CAS NO 61617-00-3 Pre-dispersed Rubber Antioxidant ZMMBI EPDM-Bound Ruber Antioxidant ZMTI 1. Properties: ZMMBI is synergistic agent in combination with other antioxidants. ZMMBI is non-staining antioxidant,similar performance with antioxidant MBZ....
Non-staining Rubber Antioxidant MBI(MB)
Non-staining antioxidant MBI(MB) DESCRIPTION 2- Mercaptobenzimidazole
C 7 H 6N 2 S
M.W. 150.2
CAS No.: 583-39-1
EINECS No: 209-502-6 Items Specification Powder 1st Powder Appearance white Powder Light-yellow Powder Initial Melting Point, ℃ Min. 292.0 290.0 Heat Loss, % Max. 0.30 0.5 Ash,% 0.25 0.5 Density, g/cm3 1.42...
Non-staining Antioxidant MMBI Powder
Non-staining antioxidant MMBI DESCRIPTION 2- Mercaptobenzimidazole C8H8N2S M.W. 164.23 CAS No.: 53988-10-6 EINECS No: 258-904-8 Items Specification Powder 1st grade Appearance Grey white Powder Light-yellow Powder Initial Melting Point, ℃ min. 273.0 270.0 Heat Loss, % max. 0.30 0.50 Ash,% 0.25 0.50 Density, g/cm3 1.25...
Non-staining Antioxidant ZMMBI(MMBZ,ZMTI) Powder
Non-staining antioxidant ZMMBI(MMBZ,ZMTI) DESCRIPTION 2-Mercaptomethylbenzimidazole C16H16N4S2Zn M.W. 391.38 CAS No.:061617-00-3 EINECS No: 220-189-5 Items Specification High powder 1st powder Appearance White powder Grey powder Initial Melting Point, ℃ Min. 270.0 270.0 Heat Loss, % Max. 0.30 0.50 Zinc % 18.0-20.0...
Polymer bound foaming agent ADC-50
Actmix ADC-50GE Actmix ADC-75GE EPDM Foaming Agent Azodicarbonamide Pre-dispersed Rubber Blowing Agent ADC ADC Masterbatch CAS No 123-77-3 PROPERTIES: ADC is a nitrogenous organic foaming agent for various rubbers such as CR, EPDM, IIR, NBR(NBR/PVC) and SBR, especially for tiny and uniform pored products. ADC powder...
Stained Rubber Accelerator MBTS-75GE/C
Stained Rubber Accelerator MBTS-75GE/C for easily identification Product composition: Approx. 75 wt% 2,2-Dibenzothiazole disulfide (MBTS/DM)
CAS No.: 120-78-5 EINECS No.: 204-424-9
Approx. 25 wt% polymer binder and dispersing agent
Specification:
Rubber Accelerator Stained in Purple DPG
Rubber Accelerator Stained in Purple DPG Product composition:
Approx. 80 wt% 1,3-diphenylguanidine (DPG/D)
CAS No.: 102-06-7 EINECS No.: 203-002-1
Approx. 20 wt% polymer binder and dispersing agent Specification:
Stained Rubber Accelerator TMTD-70
PROPERTIES: TMTD can extremely accelerate curing rate of natural and synthetic rubber and has good scorching safety. It almost does`t affect degree of cross-linking but lower scorching rate and extend total curing time when thiols or sulfena
Pre-dispersed Rubber Scorching Retarders CTP-50
Pre-dispersed Rubber Scorching Retarders CTP-50 Prepared Rubber Scorching Retaders Premix CTP-50/SBR binder Cas No 17796-82-6 CTP Compared to traditional CTP powders, Actmix®CTP-50GS allows: Dust free products with a complete filtration up to 150µm, avoid bad odor of CTP, health guard of operators. Effective guarantee...
Slab-form Pre-dispersed rubber curing agent DTDM-80
Pre-dispersed rubber curing agent Dithiodimorpholine DTDM-80 Non-staining sulphur donor for the vulcanization of natural and synthetic rubber compounds. Product composition: Approx. 80 wt% 4,4'-Dithiodimorpholine (DTDM) CAS No.: 103-34-4 EINECS No.: 203-103-0 Approx. 20 wt% polymer binder and dispersing...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.